Why Coupling Grease?
Satisfactory lubrication is vital for satisfactory gear coupling operation. Gear Coupling Grease is exclusively created for gear coupling applications to improve coupling life although dramatically minimizing upkeep time. Its high viscosity base oil and tackifier combine to keep the grease in place and avoid separation and it is in finish compliance with NSI/AGMA 9001-B97 lubrication recommendations.
Coupling Grease is dark brown in colour and produced which has a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to high centrifugal forces usually discovered in couplings. Bearing or general goal greases usually separate and eliminate effectiveness as a result of high centrifugal forces on the a variety of ingredients at high rotational speeds. These higher centrifugal forces encountered in couplings separate the base oil from your thickeners. Heavy thickeners, which have no lubrication qualities, accumulate in the gear tooth mesh place resulting in premature coupling failure. Gear Coupling Grease is intended to remarkably resistant to centrifugal separation from the oil and thickener, which will allow the lubricant to become made use of for a reasonably long period of time.
Among the tricks for the results of Gear Coupling Grease will be the variable consistency through the entire functioning cycle on the application. The consistency of our gear coupling grease alterations with the operating ailments. Functioning with the lubricant under actual support ailments leads to the grease to develop into semi-fluid, functionally solash lubricating the dress in surfaces of your coupling. Since the grease cools, it returns for the authentic consistency, therefore stopping leakage.
Gear Coupling Grease is accessible from stock in 14 oz. cartridges, 1 lb. and 5 lb. cans.
Functions
Minimizing of coupling dress in
Resistance to water washing
Corrosion and rust protection
High load carrying capabilities
Extended relubrication frequency
Use at temperatures as much as 325° F
Staying in spot below substantial speeds
Resistance to centrifugal separation
Reduction in down time & maintenance cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and 1. This grease is specially formulated that has a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.